3613-V5 High Speed Contour Band Saw
Machine Capacity: w 36″ x h 13″ (915mm x 330mm)
Production Level: Medium/Intermediate
Speed: High-Speed
Standard features: 5 Hp Drive Motor, Work Light, Chip Blower and Post Elevating Hand Wheel
Take all of the features and benefits of the 36XX Series of DoALL band saws and turn it up a notch with a higher-speed cutting rate for volume production applications.
The DoALL 3613-V5 high speed, vertical contour band saw features a variable frequency 5 hp (3.75 kW) AC inverter drive controls that start the motion of the band wheels slowly to reduce mechanical shock and increase drive train life. As an additional safety feature for the operator, a dynamic braking function rapidly stops blade motion when power is shut-off – reducing kickback from materials and injury from the band saw blade.
The 3613-V5 medium production, upright metal cutting band saw is widely used in locations that cut a large variety of materials in one production day. The 3613-V5 can also be used for plastics, wood and other materials – making it a flexible “work horse” for facilities that demand only the best finished products.
3613-V5 Contour Bandsaw
In high-production operations where materials vary and deadlines are tight, the right cutting equipment can make all the difference. The 3613-V5 contour bandsaw from DoALL Sawing Products delivers speeds up to 5,500 feet per minute (fpm) with the ability to cut aluminum, hardened steel, composites and more. This versatile machine can quickly transition between straight and contour cuts, making it a reliable workhorse that busy shops depend on daily.
High-Speed Contour Saws for Sale at DoALL Sawing Products
The 3613-V5 offers impressive cutting performance thanks to a 5-horsepower inverter drive that starts the blade gradually to protect components and extend machine life. With a 36-inch throat depth and 13-inch cutting height, this medium-production bandsaw can handle larger workpieces without sacrificing precision. The dynamic braking system stops the blade quickly, helping reduce the risk of material kickback and operator injury.
The saw features a spacious 26 by 26-inch table on a heavy-duty steel frame that gives operators plenty of room to maneuver materials. The controls are mounted directly onto the column, keeping the operator's hands safely away from the cutting zone during startup and when adjusting the speed. The band tension indicator helps prevent common mistakes that lead to premature blade failure and inconsistent cuts.
Other key features that make the 3613-V5 stand out include:
- Variable speed control from 550 to 5,500 fpm for optimal cutting across metals, plastics and wood.
- 20-inch aluminum band wheels with rubber tires that help maintain blade alignment.
- Table tilt adjustment up to 45 degrees for angular cutting.
- Wheel adjustments to accommodate various blade types and widths.
- A wheel brush system that prevents chip buildup and maintains clean running surfaces.
Contour Bandsaw Applications
The 3613-V5 high-speed contour bandsaw performs exceptionally well in shops that cut a wide variety of materials. Machine shops, manufacturing plants, maintenance facilities and trade schools rely on its ability to handle ferrous and non-ferrous metals along with non-metallic materials. The high-speed capability makes this saw especially beneficial for aluminum and other non-ferrous applications where productivity is critical.
Common applications where the 3613-V5 excels include:
- High-volume production of aluminum workpieces.
- Precision contour cutting for complex parts.
- Multiple-piece stack cutting to increase throughput.
- Custom part fabrication requiring straight or curved cuts.
- Technical training in trade schools.
Benefits of Our 3613-V5 Vertical Contour Bandsaw
Adding a DoALL 3613-V5 to your shop floor means you'll see immediate benefits in your cutting operation. The gear-driven transmission delivers maximum torque to the blade teeth, preventing stalls during tough cuts. The variable frequency drive allows operators to dial in the perfect speed for each material type.
Other benefits include:
- Enhanced safety: Improved workplace safety through interlocked doors and dynamic blade braking.
- Cost savings: Lower blade costs through proper tensioning and premium guide systems.
- Operational flexibility: Versatile operation that minimizes the need for multiple cutting machines.
- Less maintenance: Reduced maintenance thanks to a highly accessible design and premium-grade components.
More advantages include choosing DoALL's ServiceALL® preventive maintenance programs and our exclusive Cut Above 10-Year Warranty.
Find Contour Bandsaws for Sale at DoALL Sawing Products Today
See firsthand why production managers and shop owners choose DoALL Sawing Products first for their cutting operations. Contact us today to request a quote for the 3613-V5 high-speed contour bandsaw and start improving your productivity and cut quality.
Standard equipment for the 3613-V5 includes:
- Table tilt to 45 degrees negative - 10 degrees positive.
- 20" Aluminum bandwheels with crowned rubber tires.
- Upper wheel adjustment 3"
- Operator controls mounted on column.
- One set of high speed, insert type guide blocks for bands 1/8" to 1/2"
- Band wheel brush
- Variable frequency band drive.
- Work light
- Manual band tension with indicator.
- Post elevating hand wheel.
- Chip box
- Chip blower (plant air required)
- Saw blade guards.
- Band door interlocks.
- Operation and parts manuals on USB stick.
- Recommended job selector
- One (1) complimentary DoALL Bi Metal saw blade.
- Insert setting gages with wrench and trunnion wrench
Details:
- Column Mounted Controls-Column mounted controls give the operator easy access to band start and blade speed insuring their hands are away from the blade at band start.
- Variable Frequency Band Drive-Band drive is comprised of an electric variable frequency drive controlled motor transferring power thru our time honored, gear driven, 2 speed transmission giving maximum torque to the tooth tips of the sawblade reducing band stall and tooth strippage.
- Post Elevating Handwheel-Easy to operate post elevating handwheel allows the operator to keep the upper saw guide block as close to the top of the material being cut without getting their hands close to the blade during adjustment. Proper positioning minimizes the possibility of band deflection increasing band life and safety.
- Bandwheels-Cast aluminum, crowned bandwheels, are supplied with rubber tires to minimize wheel wear and insure proper band tracking. The tires allow for minimum damage to the set of your saw band.
- Manual Band Tension-Proper blade tension is manually set to a factory installed indicator which covers all widths of saw bands. This indicator will prevent the possibility of over/under tightening of the sawband for maximum cutting rates and extended band life.
- High Band Speeds-The machine's 5hp band motor and high-speed spindle allow for maximum cutting rates at higher speeds while sawing non-ferrous materials such as aluminum, plastics, wood, and rubber.
- Wheel Brush-the surface of the lower wheel minimizing damage to the lower wheel tire by reducing any chip buildup which may cause improper blade tracking.
- Saw Guide-Machine is equipped with one set of DoALL invented chevron type saw guide blocks and inserts which will handle 1/8-1/2” sawbands. These will allow proper support to the side and back of the band minimizing deflection due to overfeed conditions.
- Safety Systems-Band door interlocks prevent the starting of the saw band while the doors are open. They will also stop the band drive if the doors open during operation which protects the operator from being exposed to a moving band.
- 10 year manufacturer’s warranty available (DoALL Cut Above 10 Year Warranty Annual Investment).
Machine Specs:
- Unitized Frame: Arc-welded steel
- Throat, Band to Column: 36" (915mm)
- Maximum Work Height: 13" (330mm)
- Band Width Capacity: 1/16" to 1" (1.5mm to 27mm)
- Saw Band Length: 199" (5,055mm)
- File Band Length: 198" (4,950mm)
- Wheels: Aluminum with crowned rubber tires
- Band Drive Motor: 5 hp (3.75kW)
- Variable Band Speed: 550 to 5,500 fpm (170 to 1,625 m/min)
- Table Height, Table to Floor: 40" (1,000mm)
- Table: 26" x 26" (660mm x 660mm), tilt 45° right and 10° left
- Upper Wheel Adjustment: 2" (75mm)
- Height, Maximum: 82" (2,050mm)
- Floor Area: 39" x 80.5" (990mm x 2,045mm)
- Machine Color: DoALL blue (RAL Color #: 5012)
Specs:
Saw Blade:
- Band Width Capacities: 1/8" to 1"
- Blade Length: 199"
Band Drive:
- Motor HP- 5 Hp
- Band Speed High range 550-5500 fpm
Band Tension:
- Manual
Coolant System:
- Mist Lubricator Optional
Floor Space Dimensions:
- W x L X H 39" x 81" x 82"
- Material Pass Height 39"
- Machine Weight 1,550 lbs.
Electrical:
- Voltage Requirement 208V, 230V or 460V-60Hz-3ph
- Wye configuration (Must Specify at Order Placement)
Total Amp Draw:
- (FLA) 10.7(208) 10.7(230)5.3(460)Amps
Optional Accessories:
- Secondary Table 17" x 19"
- 12" Travel glide table with (2) point safety buttons on the handles for blade start
- 18" Travel glide table with (2) point safety buttons on the handles for blade start
- Work holding vise to fit table "T" slots (Must use option A , B, or D)
- Extended traverse work table: 1100 lb. capacity, four (4) 2" T-Slots, 34 x 42" table area, reduces work height by approximately 4
- DBW-15 welder with grinder, column mounted, for 240 volts and below
- DBW-15 welder with grinder, column mounted, for 460 volt
- Extended work height 6 inch increments - Call for quote
- Work holding jaw with handles
- Band mist lubricator-80 psi plant air required
- Standard rip fence that attaches to 26 x 26" table
- No. 2 standard cut-off and mitering attachment for 26 x 26" table
- Disk cutting attachment - Capacity 2-1/2 - 30" diameter
- Magnetic wand chip remover
- High-speed guide blocks for bands 1/8" to 1/2" (1.5 - 13 mm), speeds to 6,000 fpm (1,830 m/min) less inserts (per pair
- Heavy-duty (high-speed) saw guide blocks for bands 1/8" to 1/2" (1.5 - 13 mm), speeds to 6,000 fpm (1,830 m/min) less inserts (per pair)
- Heavy-duty (high-speed) saw guide blocks for bands 5/8" to 3/4" (16 - 19mm), speeds to 6,000 fpm (1,830 m/min) less inserts (per pair)
- Heavy-duty (high-speed) saw guide blocks for 1" (27 mm) band, speeds 6,000 fpm (1,830 m/min) less inserts (per pair)
- Heavy-duty (high-speed) saw guide blocks with carbide-faced backup for bands 1/8" to 1/2" (1.5 - 13 mm), speeds to 6,000 fpm (1,830 m/min) less inserts (per pair)
- Heavy-duty (high-speed) saw guide blocks with carbide-faced backup bearings for 5/8" and 3/4" (16 and 19 mm) bands, speeds to 6,000 fpm (1,830 m/min) less inserts (per pair)
- Heavy-duty (high-speed) saw guide blocks with carbide-faced backup bearings for 1" (27 mm) bands only, speeds to 6,000 fpm (1,830 m/min) less inserts (per pair)
- Additional set of hardened tool steel reversible saw guide inserts (set of 4) for any single band width:
- 1/8" (3 mm)
- 3/16" (5 mm)
- 1/4" (6 mm)
- 3/8" (10 mm)
- 1/2" (13 mm)
- 5/8" (16 mm)
- 3/4" (19mm)
- 1" (27 mm)
- Optional tungsten-carbide, single-faced saw guide inserts (set of 4) for any single band width:
- 1/4" (6 mm)
- 3/8" (10 mm)
- 1/2" (13 mm)
- 5/8" (16 mm)
- 3/4" (19 mm)
- 1" (27 mm)
- Type I high-speed roller guide blocks, less rollers (per pair)
- 1/4" (6 mm)
- 3/8" (9 mm)
- 1/2" (13 mm)
- Type II high-speed roller saw guide blocks, less rollers (per pair) reduces work height 1" (27 mm) and restricts table tilt to 27°
- Set of Type II rollers for band saw width: (**Must purchase block MM above)
- 1/4" (6 mm)
- 3/8" (9 mm)
- 1/2" (13 mm)
- 5/8" (16 mm)
- 3/4" (19 mm)
- 1" (27 mm)
- Additional USB stick of manuals
- A Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards
- Five (5) hours installation and operator training
- DoALL Cut Above 10 Year Warranty Annual Investment