Toggle Nav
DoALL®

3613-V3 Vertical Contour Band Saw

Machine Capacity: w 36″ x h 13″ (915mm x 330mm)
Production Level: Low

Standard features: Work Light, Chip Blower and Post Elevating Hand Wheel

The DoALL 3613-V3 vertical contour band saw is perfect for operations which require flexibility and rugged dependability. The ease of use for the machine operator also makes this vertical band saw an excellent choice.

The DoALL 3613-V3 can also be fitted with an optional blade welder, for sizing blades and doing contoured keyhole cuts on a variety of materials. The 3613-V3 offers a w 36″ by w 13” (915mm x 330mm) cutting capacity with a tilting table that adjusts to meet a variety of needs.

Powered by a variable frequency 3 hp (2.23kW) AC inverter drive motor, you won’t be lacking in performance when it’s needed to do the job at hand.

SHOP DOALL ONLINE
SKU 290215
Share:

Standard equipment for the 3613-V3 includes:

  • One set of high-speed, insert-type guide blocks for bands 1/8" to 1/2" (1.5mm - 13mm)
  • Band tension indicator
  • One set of steel guide inserts for bands 1/4", 3/8" and 1/2" (6mm, 9mm, 13mm)
  • Job selector
  • Band speed indicator reading in FPM
  • Work light
  • Post elevating hand wheel
  • Chip blower - Requires 80 psi plant air
  • Variable frequency AC drive
  • Removable chip drawer
  • Dual-range transmission
  • Tool kit
  • Operations and parts manuals on CD or USB data stick
  • One (1) complimentary DoALL bi-metal saw blade

Machine Specs:

  • Unitized Frame: Arc-welded steel
  • Throat, Band to Column: 36" (915mm)
  • Maximum Work Height: 13" (330mm)
  • Band Width Capacity: 1/8" to 1" (1.5mm to 27mm)
  • Saw Band Length: 199" (5,055mm)
  • File Band Length: 198" (4,950mm)
  • Wheels: Aluminum with crowned rubber tires
  • Band Drive Motor: 3hp (2.23kW) Inverter
  • Variable Band Speed: 30 to 320 / 550 to 5,500 fpm (9 to 98 / 170 to 1,625 m/min)
  • Table Height, Table to Floor: 40" (1,000mm)
  • Table: 26" x 26" (660mm x 660mm), tilt 45° right and 10° left
  • Upper Wheel Adjustment: 2" (75mm)
  • Height, Maximum: 82" (2,050mm)
  • Floor Area: 39” x 80.5" (990mm x 2,045mm)
  • Color: DoALL blue (RAL 5012)

Optional Accessories: 

  • Secondary Table 17" x 19"
  • 12" Travel glide table with (2) point safety buttons on the handles for blade start
  • 18" Travel glide table with (2) point safety buttons on the handles for blade start
  • Work holding vise to fit table "T" slots (Must use option A , B, or D)
  • Extended hydraulic traverse work table: 36 inch stroke, 1100 lb. capacity, four (4) 2" T-Slots, 34 x 42" table area, reduces work height by approximately 4"
  • DBW-15 welder with grinder, column mounted, for 240 volts and below
  • DBW-15 welder with grinder, column mounted, for 460 volt
  • Extended work height 6 inch increments - Call for quote
  • Work holding jaw with handles
  • Band mist lubricator-80 psi plant air required
  • Standard rip fence that attaches to 26 x 26" table
  • No. 2 standard cut-off and mitering attachment for 26 x 26" table
  • Disk cutting attachment - Capacity 2-1/2 - 30" diameter
  • Magnetic wand chip remover
  • High-speed guide blocks for bands 1/8" to 1/2" (1.5 - 13 mm), speeds to 6,000 fpm (1,830 m/min) less inserts (per pair)
  • Heavy-duty (high-speed) saw guide blocks for bands 1/8" to 1/2" (1.5 - 13 mm), speeds to 6,000 fpm (1,830 m/min) less inserts (per pair)
  • Heavy-duty (high-speed) saw guide blocks for bands 5/8" to 3/4" (16 - 19mm), speeds to 6,000 fpm (1,830 m/min) less inserts (per pair)
  • Heavy-duty (high-speed) saw guide blocks for 1" (27 mm) band, speeds 6,000 fpm (1,830 m/min) less inserts (per pair)
  • Heavy-duty (high-speed) saw guide blocks with carbide-faced backup for bands 1/8" to 1/2" (1.5 - 13 mm), speeds to 6,000 fpm (1,830 m/min) less inserts (per pair)
  • Heavy-duty (high-speed) saw guide blocks with carbide-faced backup bearings for 1" (27 mm) bands only, speeds to 6,000 fpm (1,830 m/min) less inserts (per pair)

Additional set of hardened tool steel reversible saw guide inserts (set of 4) for any single band width:

  • 1/8" (3 mm)
  • 3/16" (5 mm)
  • 1/4" (6 mm)
  • 3/8" (10 mm)
  • 1/2" (13 mm)
  • 5/8" (16 mm)
  • 3/4" (19mm)
  • 1" (27 mm)

Optional tungsten-carbide, single-faced saw guide inserts (set of 4) for any single band width:

  • 1/4" (6 mm)
  • 3/8" (10 mm)
  • 1/2" (13 mm)
  • 5/8" (16 mm)
  • 3/4" (19 mm)
  • 1" (27 mm)

Type I high-speed roller guide blocks, less rollers (per pair)

  • 1/4" (6 mm)
  • 3/8" (10 mm)
  • 1/2" (13 mm)

Type II high-speed roller saw guide blocks, less rollers (per pair) reduces work height 1" (27 mm) and restricts table tilt to 27°

Set of Type II rollers for band saw width: 

  • 1/4" (6 mm)
  • 3/8" (10 mm)
  • 1/2" (13 mm)
  • 5/8" (16 mm)
  • 3/4" (19 mm)

 

  • Additional USB stick of manuals
  • A Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards
  • DoALL Cut Above 10 Year Warranty Annual Investment
  • Four (4) hours installation and operator training
pdf
(Size: 196.6 KB)
DoALL-3613-V3-Machine-Footprint
pdf
(Size: 1.9 MB)
DoALL-Vertical-Countour-Saws-Brochure