DCDS-750SA Dual Column Semi-Automatic Band Saw

Machine Details & Specs:

Operator Control Console
Control console can be positioned for operator comfort and safety insuring hands are away from blade at band start.

Mitsubishi Touch Screen Panel
The touch screen control panel displays cutting cycle indicator, blade tension indicator, BRP (overfeed protection) function, band speed, head angle, band drive amp load and a list of error messages allowing operator to monitor machine functions.

Saw Head Design
The robust head is mounted on two columns at a 7 degree slope which decreases tooth load through the cut zone increasing band life.

Direct Driven Band Drive
Drive is comprised of an electric VFD controlled motor transferring power through a gear reduction unit directly to the drive wheel eliminating belt slippage and gives positive torque to the blade.

Semi-Automatic Cycle
Programmable cycle allows the operator the ability to control hydraulic on –off, saw head movement after the cut, head raise limit through programmable set point, band drive on–off, and vise clamp-unclamp after the cut maximizing productivity.

Automatic Overload Feed Protection
BRP function monitors band drive motor amperage stopping head fall when operator set parameter is reached signaling overfeed or a dull saw band.

Band Wheels
Cast steel wheels insure band tracking and long life.

Hydraulic Clamping Vise
Full stroke, uniquely designed hydraulic vise clamps on either side of the band allowing maximum clamping close to the cut line eliminating material movement and tooth strippage.

Hydraulic Blade Tension
Illuminating indictor prevents possible error of over/under tightening the band for maximum cutting rates and band life.

Band Brush
Driven band brush removes the chips from the blade gullets which would prevent the blade from attaining maximum cutting rates and blade life.

Head Turn Table
The hydraulic angle setting may be accomplished by either using the manual buttons to the desired angle or the RTO function which will automatically takes the head to programmed position. The entered angles will be displayed on the touch screen and are measured using a digital readout for accuracy. The saw head is hydraulically locked once in position.

Automatic Movable Saw Guide Arm
Movable saw guide arm is connected to the movable vise jaw which allows proper positioning of the arm preventing blade deflection which improves blade life.

Warranty
One year parts and service subject to the terms and conditions. Optional 10-year warranty available.

Machine Specs:

• Saw Blade:
  • Width x Length - 1-1/2" x 256"
• Band Drive:
  • Motor HP - 7.5 Hp
  • Band Speed - 65-328 fpm
  • Band Tension - Hydraulic
• Hydraulic System:
  • Motor Hp - 3 Hp
  • Reservoir Size - 3.4 Gallon
• Coolant System:
  • Flood - Yes
  • Mist Lubricator – Optional
  • Motor Hp - 0.16 Hp
  • Reservoir Size - 10.5 Gallon
• Indexer:
  • Length per Stroke - N/A
  • Maximum Index Strokes Length - N/A
  • Remnant Length - N/A
• Floor Space Dimensions:
  • W x L X H - 130" x 70" x 87"
  • Material Pass Height - 31.5"
  • Machine Weight - 4,409 lbs.
• Electrical:
  • Voltage Requirement - 460V-60Hz-3ph, Wye configuration
  • Total Amp Draw (FLA) 15 Amps