Five New Semi-Automatic Metal Cutting Saws
DoALL’s Continental Series™ semi-automatic saws are the perfect choice for operations that do not require indexing or automatic cutting cycles. The operation of the five saws differs from traditional automatic or manual operation because once an operator has set the desired feed rate, blade speed and initial vise opening, a cut is complete. The band shuts off and the head returns to the upright open position and locks. The operator must manually reposition the material for another cut. Since the operator is not manually pressuring or overloading the saw blade during the cut, benefits of semi-automatic operation include increased blade life and cutting accuracy. The Continental Series™ DC-280SA, DC-330SA, DC-500SA, DC-560SA and DC-800SA high production, semi-automatic horizontal band saws are the perfect choice if you need a high production band saw but have operations that don’t require indexing or automatic cutting cycles. Semi-automatic capacities on rectangles ranges from 11-3/4" x 11" (300 x 280mm) up to 39.4" x 31.5" (1000 x 800mm).