Fabricating and Metalworking

https://www.dropbox.com/s/w6frre2awv46jah/Screenshot%202015-04-14%2012.36.55.png?dl=0https://www.dropbox.com/s/w6frre2awv46jah/Screenshot%202015-04-14%2012.36.55.png?dl=0

The redesigned DoALL 400AV features automatic indexing with an ALL NEW servo-driven ballscrew shuttle vise, pnuematic head lift and hydraulic feed control with a 10" high x 16" wide capacity of rectangles and 10 3/4 rounds at 0 degrees.

The TF-1418 can lift tilt 60° left and 45° right and has a capacity of 14" x 18" at 90°, and cuts structural steels, tube and channels, for all structural needs.